Exhibition introduction: Türkiye&ANKIROS 2026, the place of the exhibition: Türkiye Istanbul Convention Center, the sponsor: Hanover Exhibition Company, Germany, the holding period: once every two years, the exhibition area: 21832 square meters, the number of visitors: 17197, the number of exhibitors and brands reached 1020.

Türkiye Foundry, Steel Foundry and Machinery Products Exhibition was hosted by Hanover Exhibition Company in Germany. The exhibition has been held since 1992. In 2016, 975 companies from 41 countries participated in the exhibition, including 606 international exhibitors. The number of exhibitors has increased year by year. Türkiye is located at the junction of Europe and Asia, surrounded by the sea on three sides, with a superior geographical position. It can reach the Balkan Peninsula in the west, radiate the Middle East and Central Asia in the east, connect Ukraine and former Eastern Europe in the north through the Black Sea, and connect North Africa in the south through the Mediterranean Sea. It has a strong market radiation ability. At present, Türkiye is one of the countries with the fastest economic growth in the world. In 2005, the total import value of Türkiye reached US $116537. It is predicted that Türkiye's GDP growth in 2006 and 2007 will remain above 6%. According to the data of Türkiye Statistics Department, Türkiye's GNP in the first half of this year increased by 7.5% compared with the same period in 2005, far exceeding the original set annual growth target of 5%. In terms of machinery and equipment, the turnover of Türkiye in 2005 was 2.54 billion US dollars (2.41 billion US dollars in 2004). The average maximum production capacity in mechanical manufacturing also rose from 69.8% in 2002 to 80.5% in 2003, and reached 83.7% in 2004 due to the vast market demand. According to the prediction of the authoritative authority, the demand for machinery and equipment in Türkiye will increase from 10% to 12% annually by 2013; The average demand for imported machinery and equipment is also around 15%.

Casting: Smelting plants and equipment: Cupola, electric melting furnace, insulation furnace; Gas and oil heating melting furnaces and insulation furnaces; Melting insulation furnace accessories and melt treatment; Refractory materials and products: furnace lining materials; Ladle installation and equipment; Various refractory materials and products for casting; Pouring equipment: various pouring equipment and tools; Metal measuring and distribution tools and instruments; Steel ladle dryer and preheater; Melting materials and consumables: carburizing agent; Industrial gases; Cast coke; Ferroalloy melting and covering agent; Flux and slagging agent; Metal ingots, light alloys, and heavy alloys; ferroalloy; Vaccination agents; Pig iron; Alloy; Metal shavings; Modeling and core material: sand for casting; Adhesives and additives; Feeding and filter aid; Preparation and sand filling of mold materials: Machinery and equipment for preparing molding materials; Sand filling equipment and machinery; Forming additives; Die casting equipment: Die casting machines and accessories; Centrifugal casting machine and accessories; Continuous casting machine equipment and accessories; Surface cleaning of castings: sandblasting machine and accessories; Shot blasting machine and shot blasting abrasive; Grinding machine and accessories; Surface treatment equipment, tools, and materials; Welding and cutting equipment and materials; Heat treatment and drying: heat treatment furnaces and equipment; dryer; Heater; Mold manufacturing; Material handling, transportation, and storage; Auxiliary system: air compressor and accessories; Exhaust system; ventilation system; Filters and filtering equipment; Control systems, measuring, testing, and analytical instruments and equipment; Information processing; Safety, environmental control, waste removal and recycling; Foundry turnkey project, planning, construction, engineering; Research, training, relevant associations, and news media

Metallurgical production: plant and equipment: processing of high-quality materials such as ore and coke; Mineral processing; Coal selection; Ball factory; Sintering plant; Block pressing factory; Coke oven plant; Waste preparation plant; Metal furnace charge: ore; Waste materials; ferroalloy; Mother alloy; Fungi; Ironmaking plant and equipment: blast furnace plant; Redox equipment; Melting reduction plant; Establish and support equipment; Furnace material factory, coal injection molding factory; Steel manufacturing plants and equipment: basic oxygen converter; Electric furnace steel production; Secondary metallurgy; technological process; desulphurization; Components, accessories, and equipment; Continuous casting; ingot casting; Refractory materials, insulation materials; Shaping steel: furnace coil rolling mill; Hot strip rolling mill; Continuous casting and rolling mill; Plate rolling mill; Steel billets and semi-finished products; Environmental protection and waste disposal, gas purification system: dust removal and natural gas purification; Ventilation and air conditioning equipment; Recycling and disposal; In production and utilization; Wastewater treatment; Noise removal device; Auxiliary equipment; Process control and information processing; Control system, measurement, detection and analysis; Other equipment in metallurgical plants and steel rolling mills; Safety, environmental control, waste removal and recycling; Industrial safety and * * * engineering; Various steel products;

Metallurgy and Casting: Nonferrous Metal Production Plant and Equipment: Refinery; Smelting; Hydropower, metallurgy, electrochemistry; Aluminum recovery/recycling; Castings and non-ferrous metal products: ingots; Various castings; Strip casting; Continuous casting; Sand casting molds; Die cast parts; Forged parts; Pressure casting; Metal finished product production equipment: hot rolling mill; Cold rolling mill; Aluminum foil rolling mill; Wire rolling mill; Processing production line; Trimming and finishing lines; Forging machine; Drawing machine; Various metallurgical and casting materials; Electrical engineering and process control technology; Measurement and testing instruments, apparatus, tools, and techniques.

Raw materials: metallurgical raw material processing equipment, metallurgical technology and equipment, continuous casting technology and equipment, rolling technology and equipment, electrical control and testing equipment and data processing, metallurgical auxiliary materials, metallurgical products and by-products, metallurgical environmental protection technology and equipment, refractory material production equipment and products, metal sheet processing technology and equipment, metal wire processing equipment and wire mesh, steel structure manufacturing technology and equipment

• Company:Beijing Eurasia International Exhibition Co., Ltd
• Telephone:13241872919
• Truename:Li Haijun
• Mobile:13241872919
• E-mail:ouyashanghui-lihaijun@ouyashanghui.com
• Address:Room 239, People's Pictorial Building, No. 33 Chegongzhuang West Road, Haidian District, Beijing

The information on this site comes from the network and related members, and the website has done its duty to review it. Due to the uncontrollability of the process of organizing the exhibition, some of the exhibition information in the station may change the subject matter, Extending or cancelling the event, please exhibitors and visitors must check with each other again before exhibiting! All the exhibitions in this site are not hosted/co-organized or organized, if there are any disputes during the exhibition, please hold the main responsibility of the exhibition organization! QQ Email: 523138820@qq.com WeChat: 523138820 Mobile: 15313206870